What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 08:51

Upvotes:
There are two important concepts here.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The Best Tea for Lowering High Blood Pressure, Recommended by a Dietitian - EatingWell
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
The third is lightning and “how it gets conducted into a home.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
For this case there are devices called Metal oxide varistors (MOV).
It also is a device that limits the change in current flow.
A fuse is a non-resetable over current circuit protector.
Scientists discover universal rule that governs all life on Earth - The Brighter Side of News
There are three different concepts here that are getting confused.
I post the exact comment here.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
He then describes the function of a fuse.
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
I see lots of pictures of women who have huge clits are they real or what?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What does a fuse do?
Indiana Pacers assistant Lloyd Pierce taking lessons for next opportunity as head coach - Andscape
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Yankees Planning To Place Luke Weaver On Injured List - MLB Trade Rumors
Because the load is inductive, the current lags the voltage.(by a bit).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This one hit behind the barn.
New Report Details Knicks’ Jalen Brunson Concern Before Firing Tom Thibodeau - Sports Illustrated
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–16 [ OO OLAOYE OYEBODE ]
Fastest Payout Online Casino: Lucky Creek Best of Instant Withdrawal Casinos - ACCESS Newswire
First Sentence:
At least they know the answer if they wanted it.
It seems Mohan does not understand the difference between a comment and an Answer.
I gave Google’s AI Mode a shot, but I’m still sticking with Perplexity - Android Authority
eight
An AC voltage/ current source, and an ac inductive load.
The other is “what does a “fuse” do?”
[old diagram got deleted by accident]
but I think this circuit , shows a few more pieces.
Edit 2024–10.
But it can get overloaded, and no longer works.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
(Dc diagram shown, AC is similar).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
One
Here is a simplified AC power diagram.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
He then asserts :
nine
This is 'the assistant's answer'
This is where the MOV conducts again, and dissipated the energy.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
what exactly is a ‘surge’ protector?
At one ohm, the resistor has a maximum of 1 watt power.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Barnstars:
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Now when you have a certain ac resistance, then a current flows in a loop.
These devices are installed between the “hot” and “neutral” and protective ground.
so, what happens?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The bolt then partially travels down the line to your home.
But… the neutral is now “floating” because of the 1 ohm resistance.
[image of Common-mode choke]
This device then solves the entire problem.
A circuit breaker is similar, but is resettable.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–10[John johnson John Johnson ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
a photo is worth a thousand words.
but this device (an Inductor) … impedes the rapid changes in the current.
One is “what exactly is in a ‘surge protector’ ? ”
the problem then depends on "how fast does the fuse operate?".
He then describes Rainy Season and Lightning.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What is lightning?
In schematic diagrams this is the symbol for a fuse:
These are simplified answers to the original question, and does not change anything I wrote above.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.